Brady TLS 2200 - Manual (Page 50)

42 TLS2200
T M
Thermal Transfer Printer User’s Guide
Tutorial Guide
The following pages provide step-by-step instructions for creating and printing labels
using a variety of different printer functions.
The part number of the marker roll used is noted at the beginning of each tutorial. Many
of the tutorials use part number PTL-19-423. A sample roll of this 1” x 1” marker is
provided in your TLS2200

Thermal Labeling System package.
T1: Creating a One-Line Legend, Component Marker
Note: This example assumes you have marker roll PTL-19-423 loaded in your
printer.
Label to be printed:
100A
Setup Status:
H Justify Center
V Justify Center
Rotation 0 Degrees
Format Component
1.
Check the Status Bar to make sure the unit is in Component mode. If not, press
+ to toggle from Wiremarker mode to Component mode.
2. Enter 100A on line one. (Font is set at default size - 9)
3. Press .