Brady TLS 2200 - Manual (Page 75)

TLS2200
T M
Thermal Transfer Printer User’s Guide 67
9. Enter 100B on line one.
10. Press +.
11. Turn the battery power switch off to deactivate List5.
To select (recall) List5 as the active list:
1. Turn the battery power switch on.
2. Press .
3. With the cursor on Select, press .
4. Use the <
>> and arrows to select List5, then press . The part number
appears, followed by the Text Editor screen.
To add a legend to List5:
1. Press +
2. Enter 100C on line one.
3. Press +. The legend is added (or appended) to the end of List5.
To recall and edit a legend already saved in List5:
1. Press + twice to recall the second legend to the Text Editor screen.
Legend 100B displays on the Text Editor screen.
2. Press +<
>> four times to set the font size to 13.
3. Press +.
4. When the prompt appears “Save as New” or “Save as Current”, press the <
?> key
once to select “Save as Current”.
5. Press . Legend 100B is edited to a larger font size.
To delete a legend already saved in List5.
1. Press +. Legend 100C displays on the Test Editor screen.
2. Press ++. Legend 100C is now deleted from List5.
3. Press .
4. Press the <
?> key twice to select Print, then press .
5. When the “No. of Copies?” prompt appears, enter 1, then press .