Brady TLS 2200 - Manual (Page 52)

44 TLS2200
T M
Thermal Transfer Printer User’s Guide
T3: Creating a Wiremarker
Note: This example assumes you have marker roll PTL-19-423 loaded in your
printer.
Label to be printed:
1001
1001
1001
1001
Setup Status:
H Justify Center
V Justify Center
Rotation 0 Degrees
Format Component
1. Press +
2. Press + to change format mode from Component to Wire (note the
change from C to W on the LCD Status Bar).
3. Enter 1001 on line one.
4. Press .