Brady TLS 2200 User Manual

Page 49

TLS2200

T M

Thermal Transfer Printer User’s Guide

Use the <

> and <

> keys to set the height of your barcode(s), then press

Press the <

> key once to select Human Readable, then press .

Press the <

> or <

> keys to toggle the human readable text on or off as required,

then press .

If human readable, press the <

> or <

> keys to select the text font size desired,

then press .

Press the key to back out one level in the Setup Menu tree.

10. Press the <

> key twice to select Style, then press .

11. With the cursor highlighted on Rotation, press .

12. Use the <

> and <

> keys to select the desired rotation, then press .

13. Press + to exit back to the Text Editor screen.

14. Enter barcode text as needed and print your label.

Multiple Barcodes

Multiple barcodes can be entered on a label, but only one barcode can be entered per line.
Bar height can be set to one height only per label regardless of the number of barcodes
entered on the label.

Switching Between Text and Barcode Mode

Text already entered on a line can be switched from Text to Barcode mode and vice versa.
If the size of the barcode or text being switched to does not fit on the label, you encounter
the message “Reduce Type Size” when you attempt to print the label. You must scroll to
the line where the switch was made, reduce the size of the font (if text) or bar height (if a
barcode), and print again.

Note: You cannot switch the legend mode from Text to Barcode if a line contains
any invalid Code 39 barcode characters.