Class1 FoamLogix 2.1A & 1.7AHP REV D - Manual (Page 3)

FoamLogix, Model 2.1A and 1.7AHP Class “A”
Electronic Foam Proportioning Systems 3
HOW TO USE THIS MANUAL
This manual is divided into seven sections for clarity and ease of use. Each of the following manual sections
can be a stand alone section or can be used in conjunction with each other.
SECTION
1
SAFETY
This section must be carefully read, understood and adhered to strictly by all installer/builders, operators and
service personnel using the Hale FoamLogix 2.1A and 1.7AHP Foam Proportioning Systems. Do not use or
install the system until you have thoroughly read this section. Failure to comply could cause risk of serious
injury to yourself and others, or damage to the system.
SECTION
2
DESCRIPTION
Provides an introduction to the Hale foam proportioning system along with guidelines for design ing and
ordering a complete system.
SECTION
3
INSTALLATION
Provides information to assist the OEM with installation and initial setup of Hale foam proportioning systems
on an apparatus.
SECTION
4
SETUP AND CALIBRATION
Is used by the installer and end user for start-up and calibration of the Hale foam proportioning system.
SECTION
5
OPERATION
Is primarily used by the apparatus user for proper operation and maintenance of the Hale foam proportioning
system.
SECTION
6
TROUBLESHOOTING
If a problem developes, see this section for troubleshooting procedures.
SECTION
7
PARTS IDENTIFICATION
Section 7 includes a parts breakdown of the most commonly used parts of the FoamLogix System.