Class1 Engine status OEM menu - Manual

1
To enter the OEM Menu, the engine must be at less than 900 RPM
Press the switches in this sequence.
SELECT
:
SILENCE
:
SELECT
:
SELECT
:
MENU
Scroll through menu items by pressing the MENU switch.
Select items from the menu by pressing the
SELECT
switch.
After Selection, change items by pressing the
SELECT
switch.
Save information and exit from the menu by pressing the
SILENCE
switch unless noted.
* You must save any changed item before moving on in the menu!
MENU
CLR HRS
SELECT
clk: PTO PTO Clock
Press the select switch first and then the silence switch, hold both for 1 second and
then release select first and then silence to save data
SELECT
clk: USER User Clock
Press the select switch first and then the silence switch, hold both for 1 second and
then release select first and then silence to save data
MENU
SVC TIME
SELECT
Time Interval digits displayed on Engine RPM
Change hours by depressing the
SELECT
switch
Direction changes each time the key is pressed.
press
SILENCE
to update service interval (0-9999 hrs)
MENU
LV-ALM: (Y / N)
SELECT
enable or disable the low voltage alarm
MENU
AUX INP
SELECT
-AUX- IN-
configure message for this input that will be displayed when it is active.
SELECT
selects character to change, indicated by flashing cursor.
SILENCE
scroll letters (A-Z blank a-z 0-9)
Press the select switch first and then the silence switch, hold both for 1 second and
then release select first and then silence to save data
MENU
ALARM: (Y / N)
SELECT
enable or disable the aux input alarm
MENU
AUX HRS
SELECT
-AUX- HR-
configure message for this input that will be displayed when it is active.
SELECT
selects character to change, indicated by flashing cursor.
SILENCE
scroll letters (A-Z blank a-z 0-9)
Press the select switch first and then the silence switch, hold both for 1 second and
then release select first and then silence to save data
MENU
CHG LOGO
SELECT
-CLASS1-
configure message that will be displayed in the Message Center.
SELECT selects character to change, indicated by flashing cursor.
SILENCE
scroll letters (A-Z blank a-z 0-9)
Press the select switch first and then the silence switch, hold both for 1 second and
then release select first and then silence to save data
MENU
DEFAULTS
SELECT
returns ESC to default configuration.
OEM M
ENU