Class1 FoamLogix 2.1A & 1.7AHP REV D - Manual (Page 2)

FoamLogix, Model 2.1A and 1.7AHP Class “A”
Electronic Foam Proportioning Systems
2
APPARATUS INFORMATION
Hale FoamLogix System Serial Number ____________________________________________________
In Service Date ________________________________________________________________________
Fire Department _______________________________________________________________________
Engine Number ________________________________________________________________________
Calibration Factors:
Water Flow Factor __________________________________________________________________
Class A Foam Factor _____________________________________________________________
NOTICE!
Hale Products does not assume responsibility for product failure resulting from improper maintenance or operation. Hale Products
is responsible only to the limits stated in the product warranty. Product specifications contained in this manual are subject to change
without notice.
All Hale products are quality components -- ruggedly designed, accurately machined, precision inspected, carefully assembled and
thoroughly tested. In order to maintain the high quality of your unit, and to keep it in a ready condition, it is important to follow the
instructions on care and opera tion. Proper use and good preventive maintenance will lengthen the life of your unit.
ALWAYS INCLUDE THE UNIT SERIAL NUMBER IN YOUR CORRESPONDENCE.
ECO NO REV CHANGED FROM BY DATE APVD
03-110 A RELEASED FOR PRINTING PRW 6/1/2003 MAL
03-215 B UPDATED FOR DESIGN CHANGE PRW 6/30/2003 MAL
04-236 C UPDATE FOR DESIGN CHANGE LWH 10/05/04 MAL
ECR 2743 D UPDATE TO INCLUDE 1.7ahp RLL 1/15/09 DC
E CHANGE INFO ON FOAM FLOW SENSOR
REPLACEMENT
RLL 8/10/09 DC
Manual P/N: 029-0020-74-0, Rev E