beautypg.com

Electrical safety, Electrical supply, Emergency turn off – Xerox WorkCentre 7970-3795 User Manual

Page 15

background image

Safety

Electrical Safety

Carefully read the following instructions before operating your printer. Refer to these instructions to

ensure the continued safe operation of your printer.

Your Xerox

®

printer and supplies are designed and tested to meet strict safety requirements. Safety

requirements include safety agency evaluation and certification, and compliance with electromagnetic

regulations and established environmental standards.

The safety and environment testing and performance of this product have been verified using Xerox

®

materials only.

WARNING:

Unauthorized alterations, which can include the addition of new functions or connection

of external devices, can affect the product certification. For details, contact your Xerox representative.

Electrical Supply

The electrical supply for the device must meet the requirements stated on the data plate on the rear of

the device. If you are not sure that your electrical supply meets the requirements, consult your local

electricity provider or a licensed electrician.

WARNING:

The device must be connected to a grounded electrical circuit. The device is supplied with

a grounded electrical plug that fits into a grounded electrical outlet. The power cord plug only fits into

a grounded electrical outlet. The power cord design is a safety feature. If you are unable to insert the

power cord plug into your electrical outlet, consult your local electricity provider or a licensed

electrician. Always connect the device to a properly grounded electrical outlet.

Emergency Turn Off

If any of the following conditions occur, turn off the printer immediately and disconnect the power cord

from the electrical outlet. Contact an authorized Xerox service representative to correct the problem if:
• The equipment emits unusual odors or makes unusual noises.
• The power cable is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device has been tripped.
• Liquid is spilled into the printer.
• The printer is exposed to water.
• Any part of the printer is damaged.

Xerox

®

WorkCentre

®

7970 Multifunction Printer

15

User Guide

This manual is related to the following products: