Scanning to a usb flash drive – Xerox WorkCentre 7970-3795 User Manual
Page 145
Scanning
Scanning to a USB Flash Drive
1. Load the original on the document glass or in the document feeder.
2. Insert your USB Flash drive in the USB port on the printer control panel.
Note:
If the USB Flash drive is already in the USB memory port, press
Services Home, then touch
Workflow Scanning>Scan to USB.
3. On the USB Drive Detected screen, touch
Scan to USB.
4. To change any of the scan settings, use the options at the bottom of the touch screen.
For details, see
Changing the Basic Scan Settings
on page 140.
5. Press the green
Start button.
The Job Progress screen appears, and the original is scanned. The file is stored on your USB Flash
drive.
6. Remove your USB Flash drive from the printer.
Xerox
®
WorkCentre
®
7970 Multifunction Printer 145
User Guide