Xerox WorkCentre 7970-3795 User Manual
Page 100
Printing
4. To print the job now and also save the job, select the
Print and Save check box.
5. To store your job at the printer, select
Private.
6. In the Passcode field, type a passcode. The passcode is associated with your user name. After you set
a passcode, it becomes the default passcode for any print job that requires a passcode on all Xerox
®
printers. You can reset the passcode at any time from any window that contains the passcode.
7. In the Confirm Passcode field, type the passcode again.
8. Click
OK.
9. Verify that the paper is the correct size, type, and weight. If not, change the paper settings.
Note:
To select the paper for your print job, click
Paper>Select By Tray.
10. Select an option for 2-sided printing.
11. If your printer has a finisher installed, click the arrow to the right of Finishing, then select a stapling
option. The image next to Stapling shows the staple position.
12. Select a print-quality mode.
13. Select an output destination.
14. Select another tab or click
OK.
15. To print the job, select it from the job list on the printer control panel.
16. Press
OK.
After the job is saved, you can print it as needed. For details, see
Printing from Saved Jobs
on page
100
Xerox
®
WorkCentre
®
7970 Multifunction Printer
User Guide