Xerox WorkCentre M20-M20i-2723 - Manual (Page 28)

Page 2-2 Xerox WorkCentre M20i System Administration Guide
Basic N
et
w
ork
Installat
ion
Information Checklist
Before starting the basic network installation procedures, please ensure the following items
are available or have been performed:
If problems are encountered during the WorkCentre M20i installation, refer to the Problem
Solving chapter for assistance.
CAUTION: Do not connect the network cable to the WorkCentre M20i until instructed
to do so.
Item By
An existing operational network utilizing TCP/IP is required, these
procedures are not designed to install a network. Customer
A suitable network cable. Customer
If you are going to configure TCP/IP manually, you need to obtain and
record the following information:
• TCP/IP Address:
• Gateway Address:
• Subnet Mask Address:
• Primary DNS Server Address:
Refer to the Glossary for additional information on the Gateway
Address, Subnet Mask Address and Primary DNS, if needed.
Customer
Test the WorkCentre M20i to ensure it is installed fully and functioning
correctly. Customer
WorkCentre M20i print and fax drivers. Xerox