Xerox WorkCentre M20-M20i-2723 - Manual (Page 130)

Page 9-4 Xerox WorkCentre M20i System Administration Guide
Scan to E
m
ail
Configuring SMTP
This section describes how to configure the Simple Mail Transfer Protocol used by the
WorkCentre M20i for scan to Email. The settings are:
¾ SMTP IP Address - see page 9-5.
¾ Maximum Mail Size - see page 9-6.
¾ User Authentication - see page 9-7.
NOTE: All configurations for SMTP can be setup using CentreWare Internet
Services but not all settings can be setup at the machine. Refer to “Email Setup
using Internet Services” on page 9-20.