Xerox WorkCentre M20-M20i-2723 - Manual (Page 113)

Xerox WorkCentre M20i System Administration Guide Page 7-25
Network Installation
Us
in
g In
te
rn
et
Se
rvic
es
Test Print
To ensure Internet Services has been setup correctly a test print should be submitted from a
client workstation. Perform the following steps:
¾ Create a print-ready PostScript, PCL, or ASCII text file and save it on a client workstation.
¾ From a workstation that is connected to the Internet or an Intranet, use a Browser to
access the WorkCentre M20i embedded HTTP Server Home Page.
¾ In the URL field, enter the IP Address of the WorkCentre M20i.
Example: If the IP Address is 192.168.100.100, enter the following in the URL field:
http://192.168.100.100
¾ Verify that files can be sent from the workstation to the WorkCentre M20i and that they
print.
At the CentreWare Internet Services homepage for the WorkCentre M20i select
[Services].
Select [Job Submission] and complete displayed details.
Select the green [Start] button displayed at the bottom of the screen.
¾ The Internet Services installation process is now complete.
If the test print fails, refer to the Problem Solving chapter for trouble-shooting procedures.
1
2
3
4
5