Xerox WorkCentre M20-M20i-2723 - Manual (Page 148)

Page 9-22 Xerox WorkCentre M20i System Administration Guide
Scan to E
m
ail
SMTP Server
Use these instructions to configure the Simple Mail Transfer Protocol (SMTP) using
CentreWare Internet Services.
Configure SMTP
To configure SMTP, perform these steps:
¾ Enable CentreWare Internet Services (see “Enabling Internet Services” on page 9-20).
¾ At the CentreWare Internet Services Home Page for the WorkCentre M20i, select the
[Properties] tab.
¾ Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame,
and then select the [+] symbol to the left of the Protocols folder.
¾ Select [SMTP Server] and check the details are correct. If any of the details are incorrect
then enter the correct information.
¾ In the Server Information area identify where the directory will be found:
Choose whether to use the [IP address] or [Host Name].
Enter the appropriate information.
NOTE: It is recommended that you do not change the standard port number of 25.
Check the [SMTP Server Authentication] box to enable Authentication.
Enter the [Login Name] and [Password].
¾ In the Options area choose the [Maximum Message Size] from the drop-down list.
¾ Click the [Apply] button to implement any changes.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
1
2
3
4
5
6
7