Xerox WorkCentre M20-M20i-2723 - Manual (Page 27)

Xerox WorkCentre M20i System Administration Guide Page 2-1
2 Basic Network Installation
Introduction
This chapter explains how to make the basic settings to install the WorkCentre M20i on a network.
The physical connection is Ethernet and the addressing protocols are provided by TCP/IP. The
following information is provided:
¾ Information Checklist . . . . . . . . . . . . . . . . . . . . . . . 2-2
¾ Ethernet Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
¾ Basic TCP/IP Settings . . . . . . . . . . . . . . . . . . . . . . 2-5