Test print or scan, Test print, Test scan – Xerox WorkCentre M20-M20i-2723 User Manual
Page 126: Test print or scan -10
Page 8-10
Xerox WorkCentre M20i System Administration Guide
Lo
cal Co
nn
ectio
n
Test Print or Scan
To ensure the WorkCentre M20i has been installed correctly a test print or scan should be
submitted from the workstation.
Test Print
Perform the following steps:
¾
Open a document on the workstation.
¾
Select the WorkCentre M20i as the printer to which the document will be sent.
¾
Print the selected document on the device and verify that it prints correctly.
¾
The installation process is now complete.
If the test print fails, refer to the Problem Solving chapter for trouble-shooting procedures.
Test Scan
¾
Open the Twain compliant application used to scan documents.
¾
Place a document in the WorkCentre M20i.
¾
Follow the instructions for scanning from the Help supplied by the application to scan
verify that it scans correctly.
¾
The installation process is now complete.
If the test scan fails, refer to the Problem Solving chapter for trouble-shooting procedures.
1
2
3
4
1
2
3
4