Xerox WorkCentre M20-M20i-2723 - Manual (Page 179)

Xerox WorkCentre M20i System Administration Guide Page 11-11
Ad
ministratio
n
Too
ls
Network Tools
Three tools are provided for the network:
¾ Reset NIC - resets the network card after changes have been implemented.
¾ Factory Defaults- restores all settings to their factory state.
¾ Print System Data - provides you with a hard copy of the network settings.
Reset NIC
To reset the network card:
¾ Press the [Machine Status] button. 1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Network
Setup is displayed and press
[Enter].
System Admin Tools
[Network Setup]
4
¾ Press or until Reset NIC
is displayed and press [Enter].
¾ Choose Yes to reset the network
card.
Network Setup
[Reset NIC]