Xerox WorkCentre M20-M20i-2723 - Manual (Page 142)

Page 9-16 Xerox WorkCentre M20i System Administration Guide
Scan to E
m
ail
Guest User Access
This feature allows you to permit a guest user to send an Email.
NOTE: For this feature to be enabled a valid Default From address has to have
been entered and Authentication has to have been enabled.
To enter a guest user:
¾ Press the [Machine Status] button. 1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Email
Setup is displayed and press
[Enter].
¾ Press or until Guest
User Access is displayed and
press [Enter].
Email Setup
[Guest User Access]
4
¾ If you want to permit a guest user,
press or until On is
displayed and press [Enter].
Enter the Guest User Login ID
and password using the keyboard
and press [Enter].
NOTE: “Guest” is the default
Login ID.
Guest User Access
[On]