Xerox WorkCentre M20-M20i-2723 - Manual (Page 173)

Xerox WorkCentre M20i System Administration Guide Page 11-5
Ad
ministratio
n
Too
ls Managing Departments
This setting is used to enable or disable Department Mode and to clear Department data and
codes.
To manage departments:
¾ Press the [Machine Status] button. 1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until
Department is displayed and
press [Enter].
¾ Enter the master access code.
NOTE: The first time that you
access Department, you will be
prompted to enter a master
access code then re-enter it to
confirm the code.
System Admin Tools
[Department]
4
¾ Press or until
Management is displayed and
press [Enter].
Department
[Management]