Konica Minolta bizhub 500 - Manual (Page 99)

2 Administrator Operations
2-80 500/420
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
ministrator of the machine should perform the procedure for resetting the op-
eration prohibited state.
For the auth-password and priv-password, enter the password that meets
the requirements of the Password Rules. For details of the Password Rules,
see “Password Rules” on page 1-11.
To change the setting, specify the corresponding object ID. See the table be-
low for the setting items.
2.12.4 SNMP network setting function
The Administrator who has been authenticated through SNMP access au-
thentication from the PC is allowed to operate the network setting function.
To change the setting, specify the corresponding object ID. See the table be-
low for the setting items.
Setting Item Object ID
Write User Name 1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.2.2
Security Level 1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.3.2
auth-password 1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.4.2
priv-password 1.3.6.1.4.1.18334.1.1.2.1.5.6.4.2.1.5.2
Setting Item Object ID
IP address
setting IP Address 1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.3.1
BOOT Protocol use setting 1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.6.1
BOOT Protocol Type 1.3.6.1.4.1.18334.1.1.2.1.5.7.1.1.1.7.1
DNS server address setting 1.3.6.1.4.1.18334.1.1.2.1.5.7.1.2.1.3.1.1
SMTP server address setting 1.3.6.1.4.1.18334.1.1.2.1.5.7.13.1.1.3.1
NetWare set-
ting Print Server Name 1.3.6.1.4.1.18334.1.1.2.1.5.8.3.1.3.1.1
Printer Name 1.3.6.1.4.1.18334.1.1.2.1.5.8.5.1.3.1.1
AppleTalk Printer Name Setting 1.3.6.1.4.1.18334.1.1.2.1.5.9.2.1.3.1.1
NetBIOS setting 1.3.6.1.4.1.18334.1.1.2.1.5.10.1.1.4.1
420_security_E.book 80 ページ ２００７年３月７日 水曜日 午後３時１５分