Konica Minolta bizhub 500 - Manual (Page 140)

User Operations 3
500/420 3-29
Use
r Op
er
at
ions
Chapter 3
4
Touch [OK].
– If the User Box Type has been changed, go to step 5. If the User
Box Password has been changed, go to step 9.
? What happens if there is a mismatch in the User Box Password?
% If there is a mismatch between the currently registered User Box
Password and the User Box Password entered, a message appears
that tells that there is a mismatch in the User Box Password and the
screen of step 2 reappears. Perform steps 2 through 4 once again.
% If the Enhanced Security mode is set to [ON], entry of a wrong User
Box Password is counted as unauthorized access. If a wrong User
Box Password is entered a predetermined number of times (once
to three times) set by the Administrator of the machine, the screen
of step 2 reappears and the machine is set into an access lock
state. To cancel the access lock state, the Administrator of the ma-
chine must perform the Release Setting. Contact the Administrator
of the machine.
5
Select the User Box Type.
? What happens when the User Box Type is changed?
% If User Box Type has been changed from [Public] to [Personal],
Owner Name shows the User Name of the user who has registered
the User Box. To change the Owner User of the User Box to another
user, perform steps 6 through 8.
% Changing the User Box Type clears the User Box Password. Per-
form steps 9 through 15 to set the User Box Password.
420_security_E.book 29 ページ ２００７年３月７日 水曜日 午後３時１５分