9 changing the administrator password, 1 changing the administrator password, Setting can be made only from the control panel – Konica Minolta bizhub 500 User Manual
Page 66: Changing the administrator password -47
Administrator Operations
2
500/420
2-47
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.9
Changing the Administrator Password
When access to the Administrator Setting mode from the control panel by
the Administrator of the machine is authenticated, the machine enables the
operation of changing the Administrator Password required for accessing
the Administrator Setting mode.
The Administrator Password entered for the authentication purpose appears
as “*” on the display.
2.9.1
Changing the Administrator Password
2
Note
Do not leave the machine with the Administrator Setting mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Administrator Setting mode.
0
For the procedure to call the Security Setting menu to the display, see
steps 1 and 2 of “Setting the Enhanced Security mode” on page 2-11.
1
Call the Security Setting to the screen from the control panel.
2
Touch [Administrator Password].
420_security_E.book 47 ページ ２００７年３月７日 水曜日 午後３時１５分