Konica Minolta bizhub 500 - Manual (Page 142)

User Operations 3
500/420 3-31
Use
r Op
er
at
ions
Chapter 3
10
Enter the currently set 8-digit User Box Password from the keyboard or
keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 9.
11
Touch [OK].
? What happens if the User Box Password entered does not meet the
requirements of Password Rules?
% If the User Box Password entered does not match the current pass-
word, a message appears that tells that the User Box Password en-
tered is wrong. Enter the correct User Box Password.
% If the User Box Password entered does not comply with the Pass-
word Rules, a message appears that tells that the User Box Pass-
word entered cannot be used. Enter the correct User Box
Password. For details of Password Rules, see “Password Rules” on
page 1-11.
12
Enter the new 8-digit User Box Password from the keyboard and key-
pad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
420_security_E.book 31 ページ ２００７年３月７日 水曜日 午後３時１５分