Konica Minolta bizhub 500 - Manual (Page 28)

Administrator Operations 2
500/420 2-9
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.2 Enhancing the Security Function
When access to the Administrator Setting mode by the Administrator of the
machine via the control panel is authenticated, the machine enables setting
of the Enhanced Security mode that allows settings for enhancing each of
different security functions to be converted all at once.
In the Enhanced Security mode, the machine allows selection of whether to
use the Enhanced Security mode or not. If the Enhanced Security mode is
set to [ON], a count is taken of the number of unauthorized accesses to the
Administrator Setting mode, User Authentication, SNMP authentication, all
Secure Prints, and all User Boxes. A function is also set that determines
whether each password meets predetermined requirements. The security
function is thus enhanced in the Enhanced Security mode.
The following settings must first be made before the Enhanced Security
mode is set to [ON].
2
Note
First, set the Encryption Key. To set the Encryption Key, HDD Format
must first be executed. Execution of the HDD Format clears various set-
ting values. For details of items that are cleared by HDD Format, see
“Items cleared by HDD Format” on page 2-11.
If both the HDD Lock Password and Encryption Key have been set, it is
not possible to cancel the setting of either one of these.
If initialization is executed by the Service Engineer, set the Administrator
Password and turn [ON] the Administrator Setting mode again.
Settings to be Made in
Advance Description
Administrator Password An 8-digit password that meets the Password Rules.
The factory setting is “12345678.”
User Authentication Set to either [ON (MFP)] or [ON (External Server)] (Active Directory).
HDD Lock Password, En-
cryption Key Set the 20-digit HDD Lock Password or Encryption Key, or both.
(Encryption Key can be set only when the Security Kit SC-502 is
mounted).
Certificate for SSL Register the self-signed certificate for SSL communications.
Management Function
Choice Calls for setting made by the Service Engineer. For details, ask
your Service Representative.
CE Password
CE Authentication
CS Remote Care
HDD
420_security_E.book 9 ページ ２００７年３月７日 水曜日 午後３時１５分