Konica Minolta bizhub 500 User Manual
Page 78
Administrator Operations
2
500/420
2-59
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
3
A message appears that confirms whether or not the setting of the En-
cryption Key is to be continued.
Touch [Yes].
4
Enter the new 20-digit Encryption Key from the keyboard and keypad.
–
Press the [C] key to clear all characters.
–
Touch [Delete] to delete the last character entered.
–
Touch [Shift] to show the upper case/symbol screen.
–
Touch [Cancel] to go back to the HDD Setting screen.
5
Touch [OK].
?
What happens if the Encryption Key entered does not meet the re-
quirements of the Password Rules?
%
If the Encryption Key entered does not comply with the Password
Rules, a message appears that tells that the Encryption Key entered
cannot be used. Enter the correct Encryption Key. For details of
Password Rules, see “Password Rules” on page 1-11.
%
To change the Encryption Key, see “Changing the Encryption Key”
on page 2-65.
420_security_E.book 59 ページ ２００７年３月７日 水曜日 午後３時１５分