Konica Minolta bizhub 500 - Manual (Page 124)

User Operations 3
500/420 3-13
Use
r Op
er
at
ions
Chapter 3
4
Enter the currently registered User Password and a new User Pass-
word. Then, to make sure that you have entered the correct new pass-
word, enter the new User Password once again.
5
Click the [Apply].
? What happens if there is a mismatch in the Current Passwords?
% If there is a mismatch in the password between the currently regis-
tered User Password and the User Password typed in the “Current
Password” box, a message appears that tells there is a mismatch
in the User Password. Click [OK] to go back to the user authentica-
tion screen. Then, perform steps 1 through 5 again.
? What happens if the User Password entered in the New Password
box fails to meet the requirements of the Password Rules?
% If the User Password entered in the “New Password” box fails to
meet the requirements of the Password Rules, a message appears
that tells that the User Password entered cannot be used, as it fails
to meet the requirements of the Password Rules. Click [OK] to go
back to the screen of step 4. Perform steps 4 and 5 once again. For
details of Password Rules, see “Password Rules” on page 1-11.
? What happens if there is a mismatch in the password between that
entered in New Password and that entered in Retype New Pass-
word?
% If there is a mismatch in the password between that entered in the
“New Password” box and that entered in the “Retype New Pass-
word” box, a message appears that tells that there is a mismatch in
the User Password. Enter the correct User Password.
6
Click the [OK].
420_security_E.book 13 ページ ２００７年３月７日 水曜日 午後３時１５分