Konica Minolta bizhub 500 - Manual (Page 171)

4 Application Software
4-16 500/420
Application Software
Chapter 4
4.2.3 Changing User Box properties (user attributes)
2
Reminder
If the “Save box password until disconnected” check box has been se-
lected, the User Box Password entered is stored in the PC being used. If
you do not want the User Box Password stored, clear the “Save box
password until disconnected” check box.
< From the PC>
0 For the procedure to access the User Box, see steps 1 through 7 of “Ac-
cessing User Box” on page 4-10.
1
Access the User Box through PageScope Box Operator.
2
Select the icon of the desired User Box.
3
From the [File] menu, select [Property], or right-click to select [Proper-
ty].
4
Make the necessary settings.
– To set the User Box Password, perform steps 6 through 8.
? What precautions should be used when User Box Type is to be
changed to Public.
% If User Box Type is to be changed to “Public,” the User Box Pass-
word to be set should meet the requirements of the Password
Rules.
420_security_E.book 16 ページ ２００７年３月７日 水曜日 午後３時１５分