Konica Minolta bizhub 500 - Manual (Page 29)

2 Administrator Operations
2-10 500/420
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
Setting the Enhanced Security mode to [ON] changes the setting values of
the following functions.
2
Reminder
When Password Rules is set to [ON], the characters and the number of
digits used for each password are restricted. For details of Password
Rules, see “Password Rules” on page 1-11.
Function Name Factory Setting When Enhanced Security mode is set to [ON]
Password Rules OFF ON (not to be changed)
Prohibit Function When
Auth. Error Mode 1 Mode 2 (not to be changed)
Three times is set.
* In association with Secure Document Access
Method, the method is changed from authenti-
cation using Secure Document ID and pass-
word (Mode 1) to that using the password with
the secure document first narrowed down by
Secure Document ID (Mode 2).
Public User Access Allow Restrict (not to be changed)
User Name List ON OFF (not to be changed)
Print Without Authenti-
cation Restrict Restrict (not to be changed)
User Box Admin. Setting Allow Restrict (not to be changed)
SSL OFF ON (not to be changed)
FTP Server ON OFF (not to be changed)
SNMPv1/v2c Read/Write en-
abled Only Read is enabled (not to be changed)
SNMP v3 Security Level
and auth/priv-password auth/priv-pass-
word The security level can be selected from among
[auth-password] and [auth/priv-password].
An 8-digit-or-more auth-password and priv-
password can both be set.
Print Data Capture Allow Restrict (not to be changed)
Network Setting Clear Enabled Restrict
Incorrect User Box No.
Entry Print Print (Show Error Message can be changed, but
the function cannot be changed to Auto Create
User Box)
420_security_E.book 10 ページ ２００７年３月７日 水曜日 午後３時１５分