Konica Minolta bizhub 500 - Manual (Page 54)

Administrator Operations 2
500/420 2-35
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
7
Enter the new 8-digit User Box Password from the keyboard and key-
pad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 6.
8
Touch [OK].
? What happens if the User Box Password entered does not meet the
requirements of Password Rules?
% If the User Box Password entered does not comply with the re-
quirements of the Password Rules, a message appears that tells
that the User Box Password entered cannot be used. Enter the cor-
rect User Box Password. For details of Password Rules, see “Pass-
word Rules” on page 1-11.
9
To prevent entry of a wrong password, enter the 8-digit User Box Pass-
word again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 6.
420_security_E.book 35 ページ ２００７年３月７日 水曜日 午後３時１５分