Konica Minolta bizhub 500 - Manual (Page 143)

3 User Operations
3-32 500/420
Use
r Op
er
at
ions
Chapter 3
– Touch [Cancel] to go back to the screen shown in step 9.
13
Touch [OK].
? What happens if the User Box Password entered does not meet the
requirements of Password Rules?
% If the User Box Password entered does not match the currently set
User Box Password, a message appears that tells that the User Box
Password entered is wrong. Enter the correct User Box Password.
% If the User Box Password entered does not comply with the Pass-
word Rules, a message appears that tells that the User Box Pass-
word entered cannot be used. Enter the correct User Box
Password. For details of Password Rules, see “Password Rules” on
page 1-11.
14
To prevent entry of a wrong password, enter the 8-digit User Box Pass-
word again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 5.
15
Touch [OK].
? What happens if there is a mismatch in the User Box Passwords?
% If there is a mismatch in the User Box Passwords, a message ap-
pears that tells that there is a mismatch in the User Box Passwords.
Perform steps 6 through 9 once again.
420_security_E.book 32 ページ ２００７年３月７日 水曜日 午後３時１５分