Konica Minolta bizhub 500 - Manual (Page 119)

3 User Operations
3-8 500/420
Use
r Op
er
at
ions
Chapter 3
3.2 Change Password Function
When [ON (MFP)] is set for Authentication Method of User Authentication, the
machine permits each of all users who have been authenticated through
User Authentication to change his or her User Password.
The User Password entered is displayed as “*.”
3.2.1 Performing Change Password
2
Note
Do not leave the machine while you are in the user operation mode. If it
is absolutely necessary to leave the machine, be sure first to log off from
the user operation mode.
0 For the logon procedure, see “Performing user authentication” on
page 3-2.
1
Log on to the user operation mode through User Authentication from
the control panel.
2
Press the [Utility/Counter] key.
3
Touch [User Setting].
420_security_E.book 8 ページ ２００７年３月７日 水曜日 午後３時１５分