Konica Minolta bizhub 500 - Manual (Page 13)

1 Security
1-6 500/420
Security
Chapter 1
1.2.1 Check Count Clear Conditions
The following are the conditions for clearing or resetting the check count of
the number of wrong entries at the time of authentication by the Enhanced
Security mode.
-
Authentication of Administrator Setting mode is successful.
- The machine is restarted.
-
User Authentication mode is successful.
- Release of Prohibit Functions When Auth. Error is executed.
- The machine is restarted.
-
Authentication of Secure Print is successful.
- Release of Prohibit Functions When Auth. Error is executed.
- The machine is restarted.
-
Authentication of User Box is successful.
- Authentication for execution of change of User Box Name and User Box
Password is successful.
- Release of Prohibit Functions When Auth. Error is executed.
- The machine is restarted.
-
Authentication of SNMP is successful.
- Release of Prohibit Functions When Auth. Error is executed.
- The machine is restarted.
420_security_E.book 6 ページ ２００７年３月７日 水曜日 午後３時１５分