Konica Minolta bizhub PRO C6500P - Manual (Page 96)

88 Chapter 5—Managing Jobs
Deleting a Job
Once you delete a job from the Process Queue , Print Queue , or
Storage area, you need to resubmit it for processing and printing.
To temporarily remove a job from a queue, use the Move to storage
option (see "Moving a Waiting Job to the Storage Area" on
page 87).
To delete a job:
1. Right-click the desired job in the queue or Storage area, and
select Delete .
2. Click Yes .
The selected job(s) is deleted.
Unlocking a Job
Locked jobs are jobs that have been password-protected in the
Print Driver software before being submitted to print. A locked job
must be unlocked before you can change job parameters or send
the job to print.
A locked job is identified by the Locked indicator .
For more information about locking a job, see "Controlled Printing"
on page 42.
Note: You can only perform this action if the job is waiting in the queue. If the
job is active, this option is not available.
Note: You can delete more than one job at a time: Select the jobs, and
from the Job menu, select Delete.