Konica Minolta bizhub PRO C6500P - Manual (Page 182)

174 Chapter 9—System Administration
TCP/IP Setup
The IC-304 print controller is predefined with a default IP address.
The TCP/IP option enables you to change this IP address and
other TCP/IP settings.
To change the TCP/IP network settings:
1. In the Preferences window, select Network Setup .
2. In the TCP/IP area, click Change Settings next to the IP Address
parameter.
The Local Area Connection Properties dialog box appears,
followed by the Internet Protocol (TCP/IP) dialog box.
3. Select one of the following options:
• Obtain an IP address automatically: To change the IP Address
• Use the following IP address: Type the desired address—for
example, IP address:192.168.62.1 and Subnet
mask:255.255.255.0 .
4. Click OK .
Note: Before changing the network settings, consult your System
Administrator.