Konica Minolta bizhub PRO C6500P - Manual (Page 232)

224 Appendix A—Setting Parameters
7. In the Binding list, specify the direction of the binding.
Note the following behavior when loading preprinted covers
into feed trays:
• Left Binding—Trays 1, 2, or 3 —Load cover face down, top of
cover must point to rear of machine
• Left Binding—Bypass, Cover tray, PI1, PI2 —Load cover face
up, top of cover must point to rear of machine
• For Right Binding—Trays 1, 2, or 3 —Load cover face down,
top of cover must point to front of machine
• Right Binding—Bypass, Cover tray, PI1, PI2 —Load cover face
up, top of cover must point to front of machine
Print Order
Collated
¾ Select this check box to print a complete copy of the job before
the first page of the next copy is printed.
Reverse print order
¾ Select this check box to set the print order from back to front.
Face up
¾ Select this check box to deliver a job face up.
Face down
¾ Select this check box to deliver a job face down.
Outside Printing
Select this option if you want the printed side of the media on the
outside of the fold.
Inside Printing
Select this option if you want the printed side of the media on the
inside of the fold.