Konica Minolta bizhub PRO C6500P - Manual (Page 222)

214 Appendix A—Setting Parameters
C6500 Text/Graphics Quality
Slim Text
¾ Select this check box to improve the jagged edges that may
result in cases where transparent elements are overlaid on text
or vector elements. It is recommended to use this option when
graphic elements unexpectedly expand—for example, bolded
text.
Reversed Type Enhancements
¾ Select this check box to enhance reversed type (negative) text.
It is recommended to use this option when text becomes
narrower—for example, white text on a dark background.
Outline Enhancements
¾ Select this check box to enhance jagged edges of halftone text
and graphics. An outline is added to the jagged edges.
Text Smoothing
¾ Select this check box to reduce the jagged edges of darker text
or graphics.
Trapping
1. Select the Enable Trapping check box to apply trapping.
2. In the Frame thickness box, enter the desired value for the
thickness of the trapping frame.
Protect small text
¾ Select this check box so that any text that is smaller or equal to
12 pt. is not framed during FAF.
Note: The C6500 Text/Graphics Quality settings are printer-enabled features.
Note: If you don’t select the Enable Trapping check box, it does not
affect trapping incorporated by DTP applications—for example,
Photoshop. FAF should not be used with application based trapping. In a
PostScript file that already contains trapping from the originating
application, it is not necessary to use IC-304 print controller trapping.