Konica Minolta bizhub PRO C6500P - Manual (Page 231)

Setting Parameters in the Job Parameters Window 223
Center Staples
Select the Center Staples check box if you want center staples.
Printing Covers
The following options are available when a perfect binder finisher is
connected and you are printing a job to the main tray.
3. In the Pull Cover From list, select the tray that contains the
paper on which the cover will be printed.
4. In the Cover Content list, select one of the following options:
• Blank/Preprinted —when your cover is not printed as part of
the job
• Compose from file (Simplex) —when your cover is part of the
file, and should be composed and be printed on one side of
the page.
• Compose from file (Duplex) —when your cover is part of the
file and should be composed and printed on both sides of
the page.
• Print (Simplex) —when the front and back covers are
contained on the same page in the file and printed on one
side
• Print (Duplex) —when the front and back covers are
contained on the same page in the file and printed on both
sides
5. In the Cover Orientation list, select the print orientation of the
cover.
6. If you are composing the cover in the file, in the Spine list,
select one of the following options:
• Blank —to print a blank spine
• From file , to print the spine content contained in the file.
Note: If you want to staple or punch the other side of your job, on the Layout
parameter select the Rotate 180 check box.