Printing with page exceptions – Konica Minolta bizhub PRO C6500P User Manual
Page 125
Printing with Page Exceptions
117
9.
Click
Submit
, and then click the
resume
button to start
processing the job.
The brochure is printed imposed on tabloid paper, and is ready
for folding and finishing with a staple in the center pages.
For more information about setting parameters in the
Imposition
You can use an IC-304 print controller virtual printer to predefine
your imposition settings. When you create a new virtual printer or
edit an existing one, define the imposition settings for that
particular printer. These settings become the printer's default
options and are applied to all jobs that use the printer.
For more information about adding virtual printers, see
Printing with Page Exceptions
Page exceptions enable you to select a different media type for
specific pages within your job. The example in this section uses the
brochure from the imposition workflow (see
page 114) to print a cover with a different paper weight.
1.
Make sure that the tray contains tabloid paper that is heavier
than the paper needed for the rest of the job.
2.
In the workspace, verify which tray contains the heavy paper.
3.
In the
Storage
area, double-click the processed brochure job.
The job parameters window appears.
4.
Click
Exceptions
, and perform the following steps:
a.
In the
Type
list, select
Cover
.
Note: This job contains the imposed settings that you set in the previous
example.
Note: The options in the Type list are different when the imposition
method is set to saddle stitch.