Konica Minolta bizhub PRO C6500P - Manual (Page 238)

230 Appendix A—Setting Parameters
APR/OPI
In the APR/OPI area, select one of the following options:
• High resolution images: To replace low-resolution images in your
job with high-resolution images that are located in a specified
APR or OPI path.
• Low resolution images: To print the job with the existing low-
resolution images—for example, for proofing purposes.
There are two default paths in which the IC-304 print controller
searches for high-resolution images:
• Search in the input folder: The IC-304 print controller first
searches for high-resolution images in the same folder as the
PDL file.
• D:\Shared\High Res: If you want to save your high-resolution files
in this folder, copy the files to D:\Shared\High Res .
You can also add a new high-resolution path, and then edit, or
delete the path.
Paths other than the default paths are defined on a per-job basis,
or set in the virtual printer. You can specify paths on local hard
drives, CD-ROM drives, and the floppy drive connected to the IC-
304 print controller. You can also specify paths on remote clients or
file servers.
To add a high-resolution path:
1. Under the APR path box, click Add .
The HiResPath dialog box appears.
2. Click Add .
The Select dialog box appears.
3. Locate your high-resolution images, and then click Select .
The new path is displayed in the HiResPath dialog box.
4. To promote or demote a selected APR path, use the arrow
buttons.
Note: The order in which the APR paths are listed is the order in which
the IC-304 print controller searches for the high-resolution images.