Slip sheets, Layout, Scaling – Konica Minolta bizhub PRO C6500P User Manual
Page 233: Rotate 180, Image position
Setting Parameters in the Job Parameters Window
225
Slip Sheets
Slip sheets between copies
1.
Select this check box to print slip sheets with your job.
If you want to collate the job, the slip sheets are printed
between sets. If you want the job uncollated, the slip sheets are
printed between groups.
2.
In the
Tray
list, select the tray in which the specified media type
is loaded.
Layout
Scaling
¾
Select one of the following options:
•
Manual
: Enter the percent by which you want to
proportionally decrease or increase the image size.
•
Fit to output sheet size
: For the image to fit the selected
paper sheet size.
Rotate 180
¾
Select this check box to rotate your job by 180°.
Image Position
The
Image Position
feature enables you to change the location of
the entire printed image on the sheet (simplex or duplex).
This function uses the following terminology:
Same on both sides
¾
Select the
Same on both sides
check box to shift the image on
the sheet’s second side (face down image) according to the
shift on the sheet’s first side (face up image).
Note: You can also use the Fit to output sheet size option to scale
the layout for imposed jobs.
Note: Use this option to move duplex page data away from the spine.