Konica Minolta bizhub PRO C6500P - Manual (Page 217)

Setting Parameters in the Job Parameters Window 209
Binding selection
This check box is only available if the imposition method is either
saddle stitch or perfect bound, and the template is 2Ч1, 2Ч2, or
4×2.
North south
Select this check box if the template you chose is either step and
repeat 2×1 or 1×2. The pages will be placed 180 degrees from
each other, on the same side of the imposed sheet.
Rotate 90 deg
Select this check box to rotate all pages 90 degrees to the right.
This rotation can help correct imposition conflicts.
Spacing
Marks
¾ In the Marks list, select one of the following options:
• Crop marks: To print the lines that indicate where the sheet
should be cropped. To print the crop marks on both sides of
the page, select the
Both Sides check box.
• Fold marks: To print the lines that indicate where the sheet
should be folded.
• Crop & fold marks : To print the lines that indicate where the
sheet should be both cropped and folded.
Bleed size
¾ Enter a value. The value that you enter depends on the paper
size and imposition method you choose.
Notes:
• If you want to use crop marks incorporated in the DTP
application, make sure that enough space is left around your
page in the PostScript file so that the page prints with crop
marks.
• If your job already includes crop marks incorporated in the DTP
application, you do not need to add crop marks here. If you do
add crop marks, both sets of crop marks can be printed.