Konica Minolta bizhub PRO C6500P - Manual (Page 150)

142 Chapter 7—Color Workflow
11. Select the All Media Types check box to apply the calibration to
all media types, or select the Select check box, and then select
the required media type(s).
12. Click Finish .
Performing Calibration with a Spectrophotometer
1. In the Preferences window, under Calibration , select Calibration
is done using device tool .
2. Connect one end of the Eye-One spectrophotometer cable to
the IC-304 print controller USB port, and connect the other
end to the Eye-One Spectrophotometer.
3. Calibrate the Eye-One spectrophotometer, by placing the
spectrophotometer on its plate.
4. Load the paper you are going to use for printing in the printer.
5. In the IC-304 print controller software, from the Tools menu,
select Calibration .