Konica Minolta bizhub PRO C6500P - Manual (Page 165)

Color Tools 157
3. Click the curve in the graph to add a point, and then drag the
point to modify the separation. When you select a point, its
value appears in the
Input or Output boxes.
The Input axis represents the tone values of the image before
gradation changes. The Output axis represents the tone values
of the image after gradation changes.
4. To view gradation changes in your job, click Refresh . Changes
are automatically applied to the displayed image in the After
view.
5. To remove a point on the curve, select the point and then click
Remove .
6. To reset the gradation curve to a 45° curve, click Reset .
7. To revert to the original gradation settings, click Revert .
8. To remove the last change you made to the gradation graph,
click
Undo .
Creating a New Gradation Table
1. In the Gradation Tool window, modify your gradation table as
required.
2. Click Save .
3. In the Table name box, type the required name for the new
gradation table.
4. Click OK .
The gradation table is saved and added to the Gradation Table
list and to the Color Modes tab in the job parameters window.