Konica Minolta bizhub PRESS C8000e - Manual (Page 77)

1
2
3
4
5
7
9
8
10
6
Chapter 2: Copy Operation Perfect Binding
2-11
Copy Operation
Perfect Binding - Cover Page
Cover Blank Mode
This is used when the perfect binding is employed with no printing made on the cover sheet.
The original set in the Cover Tray is handled as a cover sheet.
Ex.: When using “Cover Blank Mode” for the perfect binding.
Cover Print 2-in-1 Mode
For the front cover, the first page and the last page (n page) of the originals are made as 2-in-
1, and the second page up to the last page but one (n - 1 page) are printed as the body of
documents with no printing made on the spine for perfect binding.
And the spine width can be set in units of 0.1 mm with the setting range between 1 to 30 mm.
Ex.: When using “Cover Print 2-in-1 Mode” for the perfect binding.
• The use of PI Tray and Perfect Binder Cover Tray is not available for “Cover Print 2-in-1
Mode.”
Cover Trimming
Turn it [ON] when you cut out the cover of Perfect Binding.
Spine Width
A setting is made for the width of Spine.
Cover Print Side
Select [Duplex] when you want to make the cover of Perfect Binding double-sided.
Cover Tray
Select the tray.
Combination Examples
It is convenient to use Perfect Binding function in combination with the following functions:
• Perfect Binding + Page Margin (Refer to p.xviii)
• Perfect Binding + Stamp (Refer to p.xviii)
Cover Blank
Cover Print 2in1 (Both sides)
n-
2