Konica Minolta bizhub PRESS C8000e - Manual (Page 40)

Paper Setting Chapter 1: Preparation for Use
1-18
Set Paper Conditions For a Tray
The registered paper setting can be recalled for tray. When you change the setting partly and
apply to the tray, use the Change Individual Set screen.
• The Paper Profile Name cannot be changed when modifying settings for individual tray.
You can register the paper settings modified for each tray. Press [Register]. Then, you can
modify the Paper Profile Name.
• About the setting operations of Paper Setting on the Utility Menu screen, refer to “Regis-
ter/Delete Paper Settings as a Paper Profile (p. 1-29).”
• About the setting operations of [Both Sides Adj.], refer to "Overview of Both Sides Adjust"
(p. 1-19).
• About the setting operations of [Curl Adjustment], refer to "Setting Curl Adjustment" (p. 1-
28).
• About the setting operations of [Air Assist], refer to "Setting Air Assist" (p. 1-40).
• By the “Process Adj.”, “Transfer Offset Adj.” and “Pressures Power Setting” can be set.
About the setting values, please contact your service representative.
• [Color Density] is available when [Yes] is set to [Use Color Density Control] on the Adjust-
ment Screen.
To recall the registered paper set-
ting: To modify the paper setting for
each tray:
1.
Display the Paper Setting
screen.
1.
Display the Paper Setting
screen. p. 1-16
2.
Press the tray button to
set the paper condition.
2.
Press the tray button to
set the paper condition.
3.
Press [Recall].
3.
Press [Change Set].
4.
Select the Paper Condi-
tions and press [OK].
4.
Edit the Paper Conditions
and press [OK].
5.
Press [Close].
5.
Press [Close].
• The MACHINE screen will be restored.