Konica Minolta bizhub PRESS C8000e - Manual (Page 169)

Chapter 8: Application About the network setting (IC-601)
8-19
1
2
3
4
5
7
9
8
10
6
Application
SMB Setting
To enable SMB setting is necessary to use the SMB printing function and the Scan to SMB
function.
• About the details of settings, refer to “User’s Guide Main Body.”
1.
Press [Utility/Counter] on the control panel.
2.
Press [Administrator Setting] - [Controller] - [Controller NIC
Setting Menu] - [SMB Setting].
3.
Select [Enable] for [SMB Send Setting] and [Print Setting].
4.
Set the other settings as required and press [OK].