Konica Minolta bizhub PRESS C8000e - Manual (Page 167)

Chapter 8: Application About the network setting (IC-601)
8-17
1
2
3
4
5
7
9
8
10
6
Application
About the network setting (IC-601)
When you use Image Controller IC-601, the network settings can be set from [Controller NIC Set-
ting Menu] accessed from the Controller Administrator Setting Screen.
• For details of the Controller Administrator Setting Screen, refer to “User’s Guide Main
Body.”
TCP/IP Setting
To enable TCP/IP setting is necessary to use the Network Printer function and the Network
Scanner function.
1.
Press [Utility/Counter] on the control panel.
2.
Press [Administrator Setting] - [Controller] - [Controller NIC
Setting Menu] - [TCP/IP Setting].
3.
From [IP Address Setting Method], select [Auto Setting] or
[Direct Setting].
• If [Auto Setting] is
selected: Go to Step 4
[Next Page]
• If [Direct Setting] is
selected: Go to Step 5
[Next Page]