Konica Minolta bizhub PRESS C8000e - Manual (Page 157)

Chapter 8: Application Command WorkStation
8-7
1
2
3
4
5
7
9
8
10
6
Application
Color Settings
The default color settings of the printer can be changed from Command WorkStation.
• To set the printer's factory default, click [Factory Defaults].
• The advanced settings can be set on the window displayed by clicking [Expert Settings].
1.
Start Command WorkStation. p. 8-2
2.
Select [Device Center] tab and click [Color Setup].
3.
From [CMYK/Grayscale] and [RGB LAB], select the profile
and processing method to use as default.
4.
If you set [Spot color matching] to use as default, click
[Spot Color] - [Spot color matching] check box.
5.
From [Gray and Black], select the processing method to
use as default.
6.
From [Output Profile], select the Output Profile to use as
default.
7.
Click [Apply].