Konica Minolta bizhub PRESS C8000e - Manual (Page 152)

Command WorkStation Chapter 8: Application
8-2
Command WorkStation
Command WorkStation is the application to control Fiery controller.
The screen of Command WorkStation has [Job Center] tab which controls jobs and [Device Cen-
ter] tab which controls server. It also displays the replenishing consumables status, server infor-
mation, and error/warning messages.
You can access several utilities from Command WorkStation. When you select [Server] menu -
[Configuration] as system administrator, you can start [Configure] which enables remote control
of the controller (p. 8-10).
This section describes calibration and color settings.
• Command WorkStation can be installed to your PC with User Software DVD.
How to start Command WorkStation
You can start Command WorkStation with the following operations:
• This section describes in the case of Windows 7.
1.
Select [Start] - [All Programs] - [Fiery] - [Command Work-
Station].
2.
Select the server to connect and click [Go].
3.
Select user authority, enter the password and click [Login].
• Command WorkStation starts and connects the server.