Konica Minolta bizhub PRESS C8000e - Manual (Page 165)

Chapter 8: Application About the network setting (Fiery controller)
8-15
1
2
3
4
5
7
9
8
10
6
Application
5.
To [Display name], enter the name displayed in e-mails sent
from the controller.
6.
To [Fiery Email Address], enter the address which the con-
troller uses to receive e-mails.
7.
From [Incoming mail server] - [Server type], select the type
of server and enter the name of the incoming mail server to
[Server].
8.
To [Incoming mail server] - [Port], enter the port number.
9.
If you enable SSL/TLS communication on receiving mails,
select [Incoming mail server] - [SSL/TLS] check box.
10.
To [Incoming mail server] - [User name] and [Password],
enter the user name and password which are used to make
connection with the mail server.
11.
To [Polling Interval], specify the interval value at which the
controller makes connection with the mail server.
12.
From [Outgoing mail server], enter the name of the outgo-
ing mail server to [Server].
13.
To [Outgoing mail server] - [Port], enter the port number.
14.
If you enable SSL/TLS communication on sending mails,
select [Outgoing mail server] - [SSL/TLS] check box.
15.
If you enable POP before SMTP, select [Add POP before
SMTP] check box.
16.
If you authenticate on sending mails, select [Authentication
required] check box and enter the user name and password
which are used for authentication.
[Next Page]